Data Collectors
Bags
Narrow Your Results
Sub Category
- List View
- Gallery View
| Page of 2 |
Kapro Basic Cross Laser
Item No. KAP862G
The 862G is a basic cross-line laser level. It is ideal for tiling, cabinet installation, framing, trim carpentry, and picture hanging. Green cross-line laser with vertical, horizontal, and cross beams Indoor laser range 65 Ft. (20m) Accuracy 1/4 In. at 50 Ft. (0.4mm/m) Manual mode for angular layout/tilted marking Includes Soft carry case, 'velcro' strap, and 2 AA batteries
Kapro Pro Cross Laser w/stand
Item No. KAP870G
The 870G boasts an IP65 rating and is ideal for tiling, deck installation and exterior layout, door and window installation. Green cross-line laser with vertical and horizontal cross lines at 90° Water and dust proof (IP65) Protective rubber over molded casing Indoor laser range 100 Ft. (30m), Outdoor range (with detector) 200 Ft. (60m) Accuracy 1/8 in. at 50 Ft. (0.2mm/m) Includes Soft carry case, wall mount, laser target, tripod adaptor, and 3 AA batteries The 870G cross line laser features a green beam. Green beams are significantly brighter and easier for the human eye to detect than red lasers, especially in indoor conditions.
Kapro Pro 3 Beam Cross w/stand
Item No. KAP873G
The Kapro 873G laser features 2 intersecting vertical and 1 horizontal green laser beams. Green beams are significantly brighter and easier for the human eye to detect than red lasers, especially in indoor conditions. The 873G is ideal for aligning tiles, cabinets, borders, moldings and trims, and door and window installation. Green laser with 3 beams one horizontal, and two vertical beams (with a 90° intersection) Indoor laser range 100 Ft. (30m), Outdoor range (with detector) 200 Ft. (60m) Accuracy 1/8 In. at 50 Ft. (0.2mm/m) Strong folding legs for angle mounting and height adjustment Shock resistant rubber casing 3 AA batteries included
Kapro 4 Beam Laser plus Plumb Dot
Item No. KAP875G
The Kapro 875G automatically determines the horizontal and vertical planes. The laser simultaneously projects one horizontal and 4 orthogonal vertical beams, intersected forward and on the ceiling, plus plumb dot down. It is ideal for setting floor and wall tiles drywall, deck, and acoustic ceiling installation framing and aligning windows and doors.The 875G All Lines laser features a green beam. Green beams are significantly brighter and easier for the human eye to detect than red lasers, especially in indoor conditions. Green laser with 5 beams plus plumb dot One horizontal, Four vertical (with 90° intersection on ceiling) Indoor laser range 100 ft. (30m), Outdoor range (with detector) 165 ft. (50m) Accuracy 1/8 in. at 50 ft. (0.2mm/m) Manual mode for tilted marking Includes laser target, rechargeable lithium ion battery, and soft carry case
Cold weather parka, premium insulated, class 3, black bottom, yellow, size 3X
Item No. OCCLUX-TJCW-Y3X
Cold weather parka, premium insulated, class 3, black bottom, yellow, size 4X
Item No. OCCLUX-TJCW-Y4X
Cold weather parka, premium insulated, class 3, black bottom, yellow, size large
Item No. OCCLUX-TJCW-YL
Cold weather parka, premium insulated, class 3, black bottom, yellow, size medium
Item No. OCCLUX-TJCW-YM
Tribrach bag, padded
Item No. SIT21-1200
Protects tribrach during transport and storage. Fits all SitePro 1200-Series Tribrach models Size 9&rdquo x 8.5&rdquo x 5.5&rdquo
Lath bag, heavy duty, 36"
Item No. SIT21-236
The SitePro 36-inch (92 cm) heavy duty lath bag is designed for purpose, durability, and with style. Constructed with high strength fiber material and tough, reinforced 8&rdquo (20 cm) diameter bucket style bottom. Features tough, waterproof and abrasion-resistant composite material at the bottom and 6&rdquo (15 cm) up the side. Designed to hold 36 inch lath, and heavy duty adjustable shoulder strap and hand loop to carry. Features three large pleated outside pockets for markers, paint, and other materials. FEATURES Hold and carry 36&rdquo (92cm) lath Constructed with high strength fiber material and tough, waterproof and abrasion-resistant material at bottom Three (3) large, pleated outside pockets Heavy duty stitching for greater durability Overall inside dimension is 8&rdquo x 33.5&rdquo(20 cm x 84 cm) Color Hi-vis orange
Lath bag, heavy duty, 48"
Item No. SIT21-248
The SitePro 48-inch (122 cm) heavy duty lath bag is designed for purpose, durability, and with style. Constructed with high strength fiber material and tough, reinforced 8&rdquo (20 cm) diameter bucket style bottom. Features tough, waterproof and abrasion-resistant composite material at the bottom and 6&rdquo (15 cm) up the side. Designed to hold 48-inch lath, and heavy duty adjustable shoulder strap and hand loop to carry. Features three large pleated outside pockets for markers, paint, and other materials. FEATURES Hold and carry 48&rdquo (122cm) lath Constructed with high strength fiber material and tough, waterproof and abrasion-resistant material at bottom Three (3) large, pleated outside pockets Heavy duty stitching for greater durability Overall inside dimension is 8&rdquo x 45&rdquo (20 cm x 114 cm) Color Hi-vis orange
Jumbo triple prism bag
Item No. SIT21-2542
The SitePro large padded case is constructed with high strength fiber material with extra thick padding to ensure any precision surveying product is protected during transport. FEATURES Thick padding on all inner sides Used for Triple Tilting Prism Inside dimensions 9 x 7 x 2-in (22.9 x 17.8 x 5.1 cm) Weighs 0.5 lb (0.34kg)
Stake bag, heavy-duty, 18"
Item No. SIT21-718
The SitePro 18-inch (46 cm) heavy duty stake bag is designed to hold 18&rdquo wood survey stakes or iron rebar. Constructed with high strength fiber material and tough, reinforced bottom. Bottom of bag features tough, waterproof and abrasion-resistant composite material. Heavy duty adjustable shoulder strap for carrying. Five large outer pockets to carry gear. Grommet drain holes are positioned at both end of bag. FEATURES Carries 18&rdquo (46 cm) survey stakes or iron rebar Constructed with high strength fiber material and tough, waterproof and abrasion-resistant material at bottom Five (5) large pockets made of tough nylon fiber material to store flagging tape, nails, or other gear Heavy duty stitching for greater durability Color Hi-vis orange Wgt 0.8 lb (0.4 kg)
Stake bag, heavy-duty, 24"
Item No. SIT21-758
Designed to hold 24-inch (60 cm) heavy duty stake bag is designed to hold 24&rdquo wood survey stakes or iron rebar. Constructed with high strength fiber material and tough, reinforced bottom. Bottom of bag features tough, waterproof and abrasion-resistant composite material. Heavy duty adjustable shoulder strap for carrying. Five large outer pockets to carry gear. Grommet drain holes are positioned at both end of bag. FEATURES Carries 24&rdquo (60 cm) survey stakes or iron rebar Constructed with high strength fiber material and tough, waterproof and abrasion-resistant material at bottom Five (5) large pockets made of tough nylon fiber material to store flagging tape, nails, or other gear Heavy duty stitching for greater durability
SHC6000 Field Controller, Geo ER BT N.American 256GB
Item No. SOK1035025-01
Bring office-level processing speed directly to your project site. Stay connected, productive, and in control with the SHC6000 field computer. Like all of our solutions, you can customize it to meet your needs and create your own workflows. Features Sunlight-readable 7-inch display Intel® Quad-Core Pentium N4200 Processor MIL-STD 810G and IP68 certified Windows® 10 operating system 8 MP rear camera, 2 MP front camera Integrated 4G LTE cellular module (optional)
GM-101 Total Station, PSL, w/S-Disp, Bluetooth, laser plummet
Item No. TOP1018762-47
This powerful, cost efficient Manual Total Station was designed from the ground up to deliver the latest technological advantages in a small, sleek design. It features an ultra-powerful EDM, best-in-class angle accuracy encoder system to provide the accuracy, speed, and endurance needed on the most demanding job sites. Plus, with a rugged housing andextended battery-life you&rsquoll be able to handle even the toughestconditions. The GM-100 series also features dual axis compensation, 32 GB USB, Bluetooth to 10m and TSshield&trade telematics for ultimate security and investmentprotection. Features 6,000m prism range 1.5mm accuracy Easy access USB memory with 32 GB storage 1" angle accuracy encoder system with exclusive IACS Rugged, waterproof/dustproof magnesium-alloy housing 28 hour battery life (eco mode)
GM-55 Total Station - Single Display, Reflectorless, Bluetooth, laser plummet, USB Host
Item No. TOP1023562-01
Standard Components for GM&rsquos Battery Pack Battery charger w/cable Three Hexagonal wrenches Screw driver Lens brush RoHS Tool bag Silica gel Lens hood Laser caution sign board Silicon cloth EMC manual card E Address card T-ENG Quick manual GM Manual CDR GM TS manual ENG EAR card Registration card(2YR) Case complete
GM-52 Total Station - Dual Display, Reflectorless, Bluetooth, laser plummet, USB Host
Item No. TOP1023562-02
Standard Components for GM&rsquos Battery Pack Battery charger w/cable Three Hexagonal wrenches Screw driver Lens brush RoHS Tool bag Silica gel Lens hood Laser caution sign board Silicon cloth EMC manual card E Address card T-ENG Quick manual GM Manual CDR GM TS manual ENG EAR card Registration card(2YR) Case complete
FC-6000 Field Controller, GEO Cell, ER, Windows 10 OS
Item No. TOP1034972-01
Powerful, tough, and versatile, the FC-6000 brings the processing speed expected in the office directly to your project site. Features & Benefits Sunlight readable 7 in. display Intel® Quad-Core Pentium N4200 Processor MIL-STD-810G and IP68 certified Windows® 10 operating system 8 MP rear camera, 2 MP front camera Integrated 4G LTE cellular module (optional) External Keyboard
GT-1201 Robotic Total Station
Item No. TOP1042636-06
Call for Promos, Trade-Ins and Special Offers Built for job site mobility, the flagship GT Series ultrasonic robotic total station enables accurate and productive workflows for highly demanding survey and construction applications. Precisely lay out or survey more points in less time and improve quality and consistency. Easy-to-use digital processes with repeatably accurate results mean less rework and better quality control. GT is one professional tool that does it all for layout, survey, and machineguidance. Features Precise positioning with single-person operation High-speed advanced ultrasonic motors Easy-to-use with MAGNET or Pocket3D software Seamless integration into BIM workflows Available in GT-1200 and GT-600 models with multiple accuracy levels Three-year instrument and five-year motor warranty Ultra-rugged IP65 dust and water resistance
GT-1203 Robotic Total Station
Item No. TOP1042636-07
Call for Promos, Trade-Ins and Special Offers Built for job site mobility, the flagship GT Series ultrasonic robotic total station enables accurate and productive workflows for highly demanding survey and construction applications. Precisely lay out or survey more points in less time and improve quality and consistency. Easy-to-use digital processes with repeatably accurate results mean less rework and better quality control. GT is one professional tool that does it all for layout, survey, and machineguidance. Features Precise positioning with single-person operation High-speed advanced ultrasonic motors Easy-to-use with MAGNET or Pocket3D software Seamless integration into BIM workflows Available in GT-1200 and GT-600 models with multiple accuracy levels Three-year instrument and five-year motor warranty Ultra-rugged IP65 dust and water resistance
GT-603 Robotic Total Station
Item No. TOP1042636-10
Call for Promos, Trade-Ins and Special Offers Built for job site mobility, the flagship GT Series ultrasonic robotic total station enables accurate and productive workflows for highly demanding survey and construction applications. Precisely lay out or survey more points in less time and improve quality and consistency. Easy-to-use digital processes with repeatably accurate results mean less rework and better quality control. GT is one professional tool that does it all for layout, survey, and machineguidance. Features Precise positioning with single-person operation High-speed advanced ultrasonic motors Easy-to-use with MAGNET or Pocket3D software Seamless integration into BIM workflows Available in GT-1200 and GT-600 models with multiple accuracy levels Three-year instrument and five-year motor warranty Ultra-rugged IP65 dust and water resistance
GT-605 Robotic Total Station
Item No. TOP1042636-11
Call for Promos, Trade-Ins and Special Offers Built for job site mobility, the flagship GT Series ultrasonic robotic total station enables accurate and productive workflows for highly demanding survey and construction applications. Precisely lay out or survey more points in less time and improve quality and consistency. Easy-to-use digital processes with repeatably accurate results mean less rework and better quality control. GT is one professional tool that does it all for layout, survey, and machineguidance. Features Precise positioning with single-person operation High-speed advanced ultrasonic motors Easy-to-use with MAGNET or Pocket3D software Seamless integration into BIM workflows Available in GT-1200 and GT-600 models with multiple accuracy levels Three-year instrument and five-year motor warranty Ultra-rugged IP65 dust and water resistance
