Chairs
Bags
Narrow Your Results
Main Category
- List View
- Gallery View
| Page of 2 |
Kapro Self-leveling Green Beam Rotary Laser with 2 Plane Manual Slope
Item No. KAP8991G
KIT Includes Laser Unit Laser Detector BeamFinder Glasses Laser Target Remote Control Rechargeable NiMH Battery Pack w/Alkaline Battery Back Up Shockproof Hard Case FEATURES IP-65 protection from dust and moisture Horizontal or vertical 360° rotating beam Plumb Down/Plumb Up point Electronic self-leveling range ±5° Five variable speeds (0, 60,120, 300, 600 rpm) Six scan modes (0°, 10°,45°, 90°,180°, 360°) Laser range up to 300m (980 ft) with laser detector Accuracy ± 0.1mm/m (0.0001&Prime/&rdquo) Manual mode for marking slopes of up to ±5° in both X and Y planes Protective Rubber over molded casing 2 Tripod threads 5/8&Prime for vertical and horizontal use Field of Applications Laying inclined concrete surfaces Ensuring run-off pathways Laying water and sewage lines Laying concrete Wall, fence and deck construction
Deluxe Ergonomic AirGrid Back Drafting Chair
Item No. OSP13-37N30D
PRODUCT HIGHLIGHTS Thick Padded Mesh Seat and AirGrid Back with Built-in Lumbar Support One Touch Pneumatic Seat Height Adjustment Adjustable Metal Foot Ring Nylon Base with Dual Wheel Carpet Casters
Black Ergonomics Chair
Item No. OSP43808-231
PRODUCT HIGHLIGHTS Contoured Molded Seat and Back with Built in Lumbar Support One Touch Pneumatic Seat Height Adjustment Multi Function Control with Adjustable Tilt Tension and Forward Tilt Ratchet Back Height Adjustment Height Adjustable Arms with PU Pads Heavy Duty Nylon Base with Dual Wheel Carpet Casters
Chair, Deluxe R2 space grid back, black mesh seat
Item No. OSP529-3R2N1F2
PRODUCT HIGHLIGHTS Breathable R2 SpaceGrid Back with Adjustable Lumbar Support Thick Padded Black Mesh Seat Pneumatic Seat Height Adjustment 2-to-1 Synchro Tilt Control with Adjustable Tilt Tension 4-Way Adjustable Flip Arms Heavy Duty Nylon Base with Oversized Dual Wheel Carpet Casters This product has achieved GREENGUARD Certification
Deluxe R2 spacegrid back chair
Item No. OSP529-E3R2N1F2
PRODUCT HIGHLIGHTS Breathable R2 SpaceGrid Back with Adjustable Lumbar Support Thick Padded Black Bonded Leather Seat with Memory Foam Pneumatic Seat Height Adjustment 2-to-1 Synchro Tilt Control with Adjustable Tilt Tension 4-Way Adjustable Flip Arms Heavy Duty Nylon Base with Oversized Dual Wheel Carpet Casters This product has achieved GREENGUARD Certification
AirGrid and Mesh Office Chair
Item No. OSP5500SL
PRODUCT HIGHLIGHTS Breathable Air Grid back with built-in lumbar support Available in black mesh or your choice of Fun Color fabric seat Pneumatic seat height adjustment 2-to-1 Synchro tilt with three position lock with seat slider Height adjustable angled arms with soft PU pads Heavy duty angled nylon base with oversized dual wheel carpet casters
Big and Tall Mesh Back Chair
Item No. OSP69220C-EC3
PRODUCT HIGHLIGHTS Thick padded contour black bonded leather seat & mesh back with adjustable lumbar support Memory foam seat One-touch pneumatic seat height adjustment Locking tilt control with adjustable tilt tension 2-way adjustable flip arms with 3-position adjustable height Chrome base with dual wheel carpet casters
ProGrid Back Mid Back Managers Chair
Item No. OSP92343-30
PRODUCT HIGHLIGHTS Breathable ProGrid Back with Built-in Lumbar Support One Touch Pneumatic Seat Height Adjustment Dual Function Control Ratchet Back Height Adjustment Coal FreeFlex Fabric Saddle Seat with Molded Foam Height and Width Adjustable Arms with PU Pads
Tribrach bag, padded
Item No. SIT21-1200
Protects tribrach during transport and storage. Fits all SitePro 1200-Series Tribrach models Size 9&rdquo x 8.5&rdquo x 5.5&rdquo
Lath bag, heavy duty, 36"
Item No. SIT21-236
The SitePro 36-inch (92 cm) heavy duty lath bag is designed for purpose, durability, and with style. Constructed with high strength fiber material and tough, reinforced 8&rdquo (20 cm) diameter bucket style bottom. Features tough, waterproof and abrasion-resistant composite material at the bottom and 6&rdquo (15 cm) up the side. Designed to hold 36 inch lath, and heavy duty adjustable shoulder strap and hand loop to carry. Features three large pleated outside pockets for markers, paint, and other materials. FEATURES Hold and carry 36&rdquo (92cm) lath Constructed with high strength fiber material and tough, waterproof and abrasion-resistant material at bottom Three (3) large, pleated outside pockets Heavy duty stitching for greater durability Overall inside dimension is 8&rdquo x 33.5&rdquo(20 cm x 84 cm) Color Hi-vis orange
Lath bag, heavy duty, 48"
Item No. SIT21-248
The SitePro 48-inch (122 cm) heavy duty lath bag is designed for purpose, durability, and with style. Constructed with high strength fiber material and tough, reinforced 8&rdquo (20 cm) diameter bucket style bottom. Features tough, waterproof and abrasion-resistant composite material at the bottom and 6&rdquo (15 cm) up the side. Designed to hold 48-inch lath, and heavy duty adjustable shoulder strap and hand loop to carry. Features three large pleated outside pockets for markers, paint, and other materials. FEATURES Hold and carry 48&rdquo (122cm) lath Constructed with high strength fiber material and tough, waterproof and abrasion-resistant material at bottom Three (3) large, pleated outside pockets Heavy duty stitching for greater durability Overall inside dimension is 8&rdquo x 45&rdquo (20 cm x 114 cm) Color Hi-vis orange
Jumbo triple prism bag
Item No. SIT21-2542
The SitePro large padded case is constructed with high strength fiber material with extra thick padding to ensure any precision surveying product is protected during transport. FEATURES Thick padding on all inner sides Used for Triple Tilting Prism Inside dimensions 9 x 7 x 2-in (22.9 x 17.8 x 5.1 cm) Weighs 0.5 lb (0.34kg)
Stake bag, heavy-duty, 18"
Item No. SIT21-718
The SitePro 18-inch (46 cm) heavy duty stake bag is designed to hold 18&rdquo wood survey stakes or iron rebar. Constructed with high strength fiber material and tough, reinforced bottom. Bottom of bag features tough, waterproof and abrasion-resistant composite material. Heavy duty adjustable shoulder strap for carrying. Five large outer pockets to carry gear. Grommet drain holes are positioned at both end of bag. FEATURES Carries 18&rdquo (46 cm) survey stakes or iron rebar Constructed with high strength fiber material and tough, waterproof and abrasion-resistant material at bottom Five (5) large pockets made of tough nylon fiber material to store flagging tape, nails, or other gear Heavy duty stitching for greater durability Color Hi-vis orange Wgt 0.8 lb (0.4 kg)
Stake bag, heavy-duty, 24"
Item No. SIT21-758
Designed to hold 24-inch (60 cm) heavy duty stake bag is designed to hold 24&rdquo wood survey stakes or iron rebar. Constructed with high strength fiber material and tough, reinforced bottom. Bottom of bag features tough, waterproof and abrasion-resistant composite material. Heavy duty adjustable shoulder strap for carrying. Five large outer pockets to carry gear. Grommet drain holes are positioned at both end of bag. FEATURES Carries 24&rdquo (60 cm) survey stakes or iron rebar Constructed with high strength fiber material and tough, waterproof and abrasion-resistant material at bottom Five (5) large pockets made of tough nylon fiber material to store flagging tape, nails, or other gear Heavy duty stitching for greater durability
Pipe Laser, TP-L6BG, green beam
Item No. TOP1034437-07
The TP-L6 pipe laser&rsquos smaller size, long-life battery, and convenient "Topcon Laser Manager" mobile app for Android devices makes the new unit one of the most flexible in the market. Field crew members are able to spend less time climbing down into holes while increasing safety. The mobile app puts the user in control remotely to visually assist with configuring settings and making adjustments. One fully charged battery can last for the whole week. Plus, the same battery can be used in other Topcon equipment on the active project site. The TP-L6 is ideal for contractors that lay pipe required to be at specific angles as well as project involving trenching, sewers, mining, and tunneling. Key Features 60 hour battery life Compact design adds flexibility, to setup in a tighter inverts Mobile app remote display makes seeing and configuring settings easier
GT-1201 Robotic Total Station
Item No. TOP1042636-06
Call for Promos, Trade-Ins and Special Offers Built for job site mobility, the flagship GT Series ultrasonic robotic total station enables accurate and productive workflows for highly demanding survey and construction applications. Precisely lay out or survey more points in less time and improve quality and consistency. Easy-to-use digital processes with repeatably accurate results mean less rework and better quality control. GT is one professional tool that does it all for layout, survey, and machineguidance. Features Precise positioning with single-person operation High-speed advanced ultrasonic motors Easy-to-use with MAGNET or Pocket3D software Seamless integration into BIM workflows Available in GT-1200 and GT-600 models with multiple accuracy levels Three-year instrument and five-year motor warranty Ultra-rugged IP65 dust and water resistance
GT-1203 Robotic Total Station
Item No. TOP1042636-07
Call for Promos, Trade-Ins and Special Offers Built for job site mobility, the flagship GT Series ultrasonic robotic total station enables accurate and productive workflows for highly demanding survey and construction applications. Precisely lay out or survey more points in less time and improve quality and consistency. Easy-to-use digital processes with repeatably accurate results mean less rework and better quality control. GT is one professional tool that does it all for layout, survey, and machineguidance. Features Precise positioning with single-person operation High-speed advanced ultrasonic motors Easy-to-use with MAGNET or Pocket3D software Seamless integration into BIM workflows Available in GT-1200 and GT-600 models with multiple accuracy levels Three-year instrument and five-year motor warranty Ultra-rugged IP65 dust and water resistance
GT-603 Robotic Total Station
Item No. TOP1042636-10
Call for Promos, Trade-Ins and Special Offers Built for job site mobility, the flagship GT Series ultrasonic robotic total station enables accurate and productive workflows for highly demanding survey and construction applications. Precisely lay out or survey more points in less time and improve quality and consistency. Easy-to-use digital processes with repeatably accurate results mean less rework and better quality control. GT is one professional tool that does it all for layout, survey, and machineguidance. Features Precise positioning with single-person operation High-speed advanced ultrasonic motors Easy-to-use with MAGNET or Pocket3D software Seamless integration into BIM workflows Available in GT-1200 and GT-600 models with multiple accuracy levels Three-year instrument and five-year motor warranty Ultra-rugged IP65 dust and water resistance
