GNSS Receivers
Frost Pin
Narrow Your Results
Sub Category
- List View
- Gallery View
| Page of 1 |
Nails, 1/4" x 6", mag hub, 362/bx
Item No. CHS23MAGHUB6
The MAG HUB is magnetized for easy detection and galivanized coatingto resist corrosion. It has a large center point and looks like a standard survey marker. The MAG HUB is less than half the price of a stake and is easy to carry. Not made to be driven in concrete or asphalt.
Nails, 1/4" x 8" mag hub, 272/bx
Item No. CHS23MAGHUB8
The MAG HUB is magnetized for easy detection and galivanized coatingto resist corrosion. It has a large center point and looks like a standard survey marker. The MAG HUB is less than half the price of a stake and is easy to carry. Not made to be driven in concrete or asphalt.
Sun-Glow 8lb Tracing paper, white, 14" x 150'
Item No. DUA35WR145000
Ideal sketch paper for Engineers, Architects, etc. Can be used with pens, pencils, or markers. Fortified to withstand considerable handling, transparent with 4 sheet overlays.
Kapro Self-leveling Green Beam Rotary Laser with 2 Plane Manual Slope
Item No. KAP8991G
KIT Includes Laser Unit Laser Detector BeamFinder Glasses Laser Target Remote Control Rechargeable NiMH Battery Pack w/Alkaline Battery Back Up Shockproof Hard Case FEATURES IP-65 protection from dust and moisture Horizontal or vertical 360° rotating beam Plumb Down/Plumb Up point Electronic self-leveling range ±5° Five variable speeds (0, 60,120, 300, 600 rpm) Six scan modes (0°, 10°,45°, 90°,180°, 360°) Laser range up to 300m (980 ft) with laser detector Accuracy ± 0.1mm/m (0.0001&Prime/&rdquo) Manual mode for marking slopes of up to ±5° in both X and Y planes Protective Rubber over molded casing 2 Tripod threads 5/8&Prime for vertical and horizontal use Field of Applications Laying inclined concrete surfaces Ensuring run-off pathways Laying water and sewage lines Laying concrete Wall, fence and deck construction
Optivision Digital Level, 24", w/carrying case
Item No. KAP905DG-24
Ideal Applications Carpentry Construction Roofing Measuring slopes, stairs and ramp layouts Features IP65 Rating dust & water resistant 2 Solid acrylic shockproof vials, including 1 Optivision Red tilted horizontal vial with gradient lines of up to 2% Digital accuracy &ndash <0.05° at level & plumb &ndash <0.2° at other angles 45° Backlit, tilted LCD display 180° readout &ndash readable when inverted HOLD & MODE function (Degree/percentage/pitch) Buzzer at 0°, 45° and 90° Recalibration function and &ldquoFalse Zero&rdquo Powerful magnets Wall-Grip Large silicone buttons Shock-absorbing rubber end caps end caps Battery indicator Finely milled surface
Optivision Digital Level, 48", w/carrying case
Item No. KAP905DG-48
Ideal Applications Carpentry Construction Roofing Measuring slopes, stairs and ramp layouts Features IP65 Rating dust & water resistant 2 Solid acrylic shockproof vials, including 1 Optivision Red tilted horizontal vial with gradient lines of up to 2% Digital accuracy &ndash <0.05° at level & plumb &ndash <0.2° at other angles 45° Backlit, tilted LCD display 180° readout &ndash readable when inverted HOLD & MODE function (Degree/percentage/pitch) Buzzer at 0°, 45° and 90° Recalibration function and &ldquoFalse Zero&rdquo Powerful magnets Wall-Grip Large silicone buttons Shock-absorbing rubber end caps end caps Battery indicator Finely milled surface
Hiper VR Rover 915+ Kit, GNSS Receiver (Price Excludes OAF)
Item No. TOP1028524-01
Details The HiPer VRis compact, light and packed with the most advanced GNSS technology in a design built to withstand the harshest field environments. Using Topcon&rsquos advanced GNSS chipset with Universal Tracking Channels Technology, the HiPer VR automatically tracks every satellite signal above &ndash now and into thefuture. All signals, all satellites and all constellations &mdash in a compact, rugged design, with an integrated IMU andeCompass. The HiPer VR is a complete solution and versatile in many ways. It can be used for static or kinematic GNSS post-processed surveys, as a network RTK rover with the FC-5000's internal 4G/LTE cellular modem, as a UHF/FH/Longlink jobsite RTK rover, and also in Topcon&rsquos patented Hybrid Positioningworkflow. Features Universal tracking technology for all satellites and constellations (GPS, GLONASS, Galileo, Beidou, IRNSS, QZSS, SBAS) covering all modernized signals Field tested, field ready IP67 design Compact form factor ideal for Millimeter GPS and Hybrid Positioning Revolutionary 9-axis IMU and ultra-compact 3-axis eCompass Integrated 400 MHz UHF Tx/Rx Radio Modem Integrated License free 900 MHz Radio Modem, FH915 protocol
Kit, Hiper VR, Base & Rover, SS 915+ radio (Price Excludes OAF's)
Item No. TOP1028526-01
The HiPer VRis compact, light and packed with the most advanced GNSS technology in a design built to withstand the harshest field environments. Using Topcon&rsquos advanced GNSS chipset withUniversal Tracking Channels Technology, the HiPer VR automatically tracks every satellite signal above &ndash now and into thefuture. All signals, all satellites and all constellations &mdash in a compact, rugged design, with an integrated IMU andeCompass. The HiPer VR is a complete solution and versatile in many ways. It can be used for static or kinematic GNSS post-processed surveys, as a network RTK rover with the FC-5000's internal 4G/LTE cellular modem, as a UHF/FH/Longlink jobsite RTK rover, and also in Topcon&rsquos patented Hybrid Positioningworkflow. Features Universal tracking technology for all satellites and constellations (GPS, GLONASS, Galileo, Beidou, IRNSS, QZSS, SBAS) covering all modernized signals Field tested, field ready IP67 design Compact form factor ideal for Millimeter GPS and Hybrid Positioning Revolutionary 9-axis IMU and ultra-compact 3-axis eCompass Integrated 400 MHz UHF Tx/Rx Radio Modem Integrated License free 900 MHz Radio Modem, FH915 protocol
Pipe Laser, TP-L6BG, green beam
Item No. TOP1034437-07
The TP-L6 pipe laser&rsquos smaller size, long-life battery, and convenient "Topcon Laser Manager" mobile app for Android devices makes the new unit one of the most flexible in the market. Field crew members are able to spend less time climbing down into holes while increasing safety. The mobile app puts the user in control remotely to visually assist with configuring settings and making adjustments. One fully charged battery can last for the whole week. Plus, the same battery can be used in other Topcon equipment on the active project site. The TP-L6 is ideal for contractors that lay pipe required to be at specific angles as well as project involving trenching, sewers, mining, and tunneling. Key Features 60 hour battery life Compact design adds flexibility, to setup in a tighter inverts Mobile app remote display makes seeing and configuring settings easier
