GNSS Receivers
20# Xerographic Bond
Narrow Your Results
Sub Category
Type
Mfr / Trade Name
- List View
- Gallery View
Page of 2 |
Kapro Self-leveling Green Beam Rotary Laser with 2 Plane Manual Slope
Item No. KAP8991G
KIT Includes Laser Unit Laser Detector BeamFinder Glasses Laser Target Remote Control Rechargeable NiMH Battery Pack w/Alkaline Battery Back Up Shockproof Hard Case FEATURES IP-65 protection from dust and moisture Horizontal or vertical 360° rotating beam Plumb Down/Plumb Up point Electronic self-leveling range ±5° Five variable speeds (0, 60,120, 300, 600 rpm) Six scan modes (0°, 10°,45°, 90°,180°, 360°) Laser range up to 300m (980 ft) with laser detector Accuracy ± 0.1mm/m (0.0001&Prime/&rdquo) Manual mode for marking slopes of up to ±5° in both X and Y planes Protective Rubber over molded casing 2 Tripod threads 5/8&Prime for vertical and horizontal use Field of Applications Laying inclined concrete surfaces Ensuring run-off pathways Laying water and sewage lines Laying concrete Wall, fence and deck construction
Inkjet mylar film, double matte, erasable, 36x125ft, 2" core, .4mil
Item No. SPIJR440IJME6
Xerographic Bond, untaped, 11x500', 20#, 3" core
Item No. SPIXB11500UT
Sold Individually by The Roll 4 Rolls in a Carton Receive best price when ordering carton quantity
Xerographic bond, untaped, 12x500, 20#, 3" core
Item No. SPIXB12500UT
Sold Individually by The Roll 4 Rolls in a Carton Receive best price when ordering carton quantity
Xerographic bond, untaped, 17x500', 20#, 3" core
Item No. SPIXB17500UT
Sold Individually by The Roll 4 Rolls in a Carton Receive best price when ordering carton quantity
Xerographic bond, untaped, 18x500', 20#, 3" core
Item No. SPIXB18500UT
Sold Individually by The Roll 4 Rolls in a Carton Receive best price when ordering carton quantity
Xerographic bond, untaped, 22x500', 20#, 3" core
Item No. SPIXB22500UT
2 Rolls in a Carton ONLINE ORDERING ONLY - Free Freight on shipments toCT, MA, ME, NH, RI, & VT Must order carton quantities to receive free freight.
GM-101 Total Station, PSL, w/S-Disp, Bluetooth, laser plummet
Item No. TOP1018762-47
This powerful, cost efficient Manual Total Station was designed from the ground up to deliver the latest technological advantages in a small, sleek design. It features an ultra-powerful EDM, best-in-class angle accuracy encoder system to provide the accuracy, speed, and endurance needed on the most demanding job sites. Plus, with a rugged housing andextended battery-life you&rsquoll be able to handle even the toughestconditions. The GM-100 series also features dual axis compensation, 32 GB USB, Bluetooth to 10m and TSshield&trade telematics for ultimate security and investmentprotection. Features 6,000m prism range 1.5mm accuracy Easy access USB memory with 32 GB storage 1" angle accuracy encoder system with exclusive IACS Rugged, waterproof/dustproof magnesium-alloy housing 28 hour battery life (eco mode)
GM-55 Total Station - Single Display, Reflectorless, Bluetooth, laser plummet, USB Host
Item No. TOP1023562-01
Standard Components for GM&rsquos Battery Pack Battery charger w/cable Three Hexagonal wrenches Screw driver Lens brush RoHS Tool bag Silica gel Lens hood Laser caution sign board Silicon cloth EMC manual card E Address card T-ENG Quick manual GM Manual CDR GM TS manual ENG EAR card Registration card(2YR) Case complete
GM-52 Total Station - Dual Display, Reflectorless, Bluetooth, laser plummet, USB Host
Item No. TOP1023562-02
Standard Components for GM&rsquos Battery Pack Battery charger w/cable Three Hexagonal wrenches Screw driver Lens brush RoHS Tool bag Silica gel Lens hood Laser caution sign board Silicon cloth EMC manual card E Address card T-ENG Quick manual GM Manual CDR GM TS manual ENG EAR card Registration card(2YR) Case complete
Hiper VR Rover 915+ Kit, GNSS Receiver (Price Excludes OAF)
Item No. TOP1028524-01
Details The HiPer VRis compact, light and packed with the most advanced GNSS technology in a design built to withstand the harshest field environments. Using Topcon&rsquos advanced GNSS chipset with Universal Tracking Channels Technology, the HiPer VR automatically tracks every satellite signal above &ndash now and into thefuture. All signals, all satellites and all constellations &mdash in a compact, rugged design, with an integrated IMU andeCompass. The HiPer VR is a complete solution and versatile in many ways. It can be used for static or kinematic GNSS post-processed surveys, as a network RTK rover with the FC-5000's internal 4G/LTE cellular modem, as a UHF/FH/Longlink jobsite RTK rover, and also in Topcon&rsquos patented Hybrid Positioningworkflow. Features Universal tracking technology for all satellites and constellations (GPS, GLONASS, Galileo, Beidou, IRNSS, QZSS, SBAS) covering all modernized signals Field tested, field ready IP67 design Compact form factor ideal for Millimeter GPS and Hybrid Positioning Revolutionary 9-axis IMU and ultra-compact 3-axis eCompass Integrated 400 MHz UHF Tx/Rx Radio Modem Integrated License free 900 MHz Radio Modem, FH915 protocol
Kit, Hiper VR, Base & Rover, SS 915+ radio (Price Excludes OAF's)
Item No. TOP1028526-01
The HiPer VRis compact, light and packed with the most advanced GNSS technology in a design built to withstand the harshest field environments. Using Topcon&rsquos advanced GNSS chipset withUniversal Tracking Channels Technology, the HiPer VR automatically tracks every satellite signal above &ndash now and into thefuture. All signals, all satellites and all constellations &mdash in a compact, rugged design, with an integrated IMU andeCompass. The HiPer VR is a complete solution and versatile in many ways. It can be used for static or kinematic GNSS post-processed surveys, as a network RTK rover with the FC-5000's internal 4G/LTE cellular modem, as a UHF/FH/Longlink jobsite RTK rover, and also in Topcon&rsquos patented Hybrid Positioningworkflow. Features Universal tracking technology for all satellites and constellations (GPS, GLONASS, Galileo, Beidou, IRNSS, QZSS, SBAS) covering all modernized signals Field tested, field ready IP67 design Compact form factor ideal for Millimeter GPS and Hybrid Positioning Revolutionary 9-axis IMU and ultra-compact 3-axis eCompass Integrated 400 MHz UHF Tx/Rx Radio Modem Integrated License free 900 MHz Radio Modem, FH915 protocol
Pipe Laser, TP-L6BG, green beam
Item No. TOP1034437-07
The TP-L6 pipe laser&rsquos smaller size, long-life battery, and convenient "Topcon Laser Manager" mobile app for Android devices makes the new unit one of the most flexible in the market. Field crew members are able to spend less time climbing down into holes while increasing safety. The mobile app puts the user in control remotely to visually assist with configuring settings and making adjustments. One fully charged battery can last for the whole week. Plus, the same battery can be used in other Topcon equipment on the active project site. The TP-L6 is ideal for contractors that lay pipe required to be at specific angles as well as project involving trenching, sewers, mining, and tunneling. Key Features 60 hour battery life Compact design adds flexibility, to setup in a tighter inverts Mobile app remote display makes seeing and configuring settings easier
GT-1201 Robotic Total Station
Item No. TOP1042636-06
Call for Promos, Trade-Ins and Special Offers Built for job site mobility, the flagship GT Series ultrasonic robotic total station enables accurate and productive workflows for highly demanding survey and construction applications. Precisely lay out or survey more points in less time and improve quality and consistency. Easy-to-use digital processes with repeatably accurate results mean less rework and better quality control. GT is one professional tool that does it all for layout, survey, and machineguidance. Features Precise positioning with single-person operation High-speed advanced ultrasonic motors Easy-to-use with MAGNET or Pocket3D software Seamless integration into BIM workflows Available in GT-1200 and GT-600 models with multiple accuracy levels Three-year instrument and five-year motor warranty Ultra-rugged IP65 dust and water resistance
GT-1203 Robotic Total Station
Item No. TOP1042636-07
Call for Promos, Trade-Ins and Special Offers Built for job site mobility, the flagship GT Series ultrasonic robotic total station enables accurate and productive workflows for highly demanding survey and construction applications. Precisely lay out or survey more points in less time and improve quality and consistency. Easy-to-use digital processes with repeatably accurate results mean less rework and better quality control. GT is one professional tool that does it all for layout, survey, and machineguidance. Features Precise positioning with single-person operation High-speed advanced ultrasonic motors Easy-to-use with MAGNET or Pocket3D software Seamless integration into BIM workflows Available in GT-1200 and GT-600 models with multiple accuracy levels Three-year instrument and five-year motor warranty Ultra-rugged IP65 dust and water resistance
GT-603 Robotic Total Station
Item No. TOP1042636-10
Call for Promos, Trade-Ins and Special Offers Built for job site mobility, the flagship GT Series ultrasonic robotic total station enables accurate and productive workflows for highly demanding survey and construction applications. Precisely lay out or survey more points in less time and improve quality and consistency. Easy-to-use digital processes with repeatably accurate results mean less rework and better quality control. GT is one professional tool that does it all for layout, survey, and machineguidance. Features Precise positioning with single-person operation High-speed advanced ultrasonic motors Easy-to-use with MAGNET or Pocket3D software Seamless integration into BIM workflows Available in GT-1200 and GT-600 models with multiple accuracy levels Three-year instrument and five-year motor warranty Ultra-rugged IP65 dust and water resistance