Calculators
Narrow Your Results
Main Category
Sub Category
Mfr / Trade Name
- List View
- Gallery View
Page of 1 |
Calculator, construction master 5, pro desk model
Item No. CAL44080
The Construction Master Pro Trig - Desktop provides construction professionals with complete trig functions to help them quickly and easily solve complex construction-math problems. It saves time, reduces costs and prevents re-work. You can effortlessly work in and convert between feet-inch-fractions and metric units. Instantly calculate complex construction challenges for stair layouts, roofs, framing and much more. Full trig functions with sine, cosine, tangent, arcsine, arccosine and arctangent. Construction Calculations Work in and convert between any building dimension, including Metric Trig Function Find Weight per Volume Built-in Right-Angle solutions Complete Stair Layouts Roof, Rafter and Framing solutions Circular Arcs, Circumference, Segments and More Stairs - Set Riser Height and solve for Stairwell Opening Studs - Find number On-center for an entered Length Compound Miter Cuts Arched Rake-Walls Equal sided Polygons The Construction Master Pro Trig - Desktop is perfect for completing layouts, bid and estimates. No office should be without it. It will save you time and money. For Contractors, Architects, Builders, Engineers, Project Managers, Estimators, Draftspersons
Calculator, ultra measure master
Item No. CAL8025
The Ultra Measure Master is a complete and easy-to-use U.S. Standard to Metric conversion calculator for engineers, architects, construction pros, scientists and students. Convert more than 60 U.S and Metric (si) units - over 400 conversion combinations with a touch of a few buttons. No need for complex scientific calculators or memorizing conversion formulas.
Calculator, concrete, calc pro
Item No. CAL4225
The easy-to-use ConcreteCalc Pro helps reduce material waste, improve design accuracy and cut estimating time. Increase efficiency in the field or in the office with fast, accurate solutions for Square-ups, Loads, Area, Volume, Rebar, Drop, Stairs and much more. It helps you Work in yards, feet-inch-fractions Calculate area, volume and weight per volume Automatic square-ups and drops Rebar solutions for total linear feet and weight per size Complete stair layouts set riser height and tread width Equal sided polygons Circular solutions for circumference, arc, cone and column For Concrete, Masonry and Paving Professionals
Calculator, heavy calc pro
Item No. CAL4325
This is the only construction-math calculator specifically designed for excavators and heavy construction professionals. Built-in functions help you quickly find solutions for area, volume, weight, slopes, swell and shrink, cut/fill and more. With the HeavyCalc Pro you'll save time, eliminate costly errors and reduce material and labor expenses. Work in and convert between Yard, Feet-Inch-Fraction and Metric formats Automatically calculate Areas and Volumes Square-ups and Right Angles Percent Grade and Slope stakeout Drops, Ramps, Trenches, much more Weight per Volume (Lbs, Tons, Kg) Find percent (%) Swell and Shrink Simplify Cut/Fill Estimates For Engineers, Designers, Excavators, Highway and Heavy Construction Professionals
Scale Master Pro, digital plan measure
Item No. CAL6025
Get instant linear, rectangular area and volume take-offs use it like a pen - just roll and measure Convert between scales and dimensions Six user-set custom scales. Calibrates to any plan and then stores that scale for future use. Perfect for scaling faxed or out-of-scale plans. Calculate rectangular areas/volumes (LxWxH). Roll and enter length of room, then width and instantly calculate square footage. 72 built-in scales 39 U.S. (feet-inch) and 33 metric. Multiple dimensional units for versatility select the measurement units you use decimal feet, feet-inches, decimal inches, yards, millimeters, meters, kilometers - including square and cubic formats Subtract and Counter feature lets you subtract if you roll too far. Also lets you count items (e.g., studs, outlets, etc.) and accumulate in memory. Easy-to-read dual display shows your measurement in feet/inches or metric Includes Hard cover protective case Complete User's Guide Two long-life CR2032 lithium batteries One-year warranty Tech Specs Size 7.3" x 1.9" x 0.6" (186 x 47 x 15 mm) Wheel Resolution 0.025" (0.635 mm) Wheel Composition Celcon Polymer Weight (product only with battery) 2.1 oz. (60 g) Power Two 3-volt lithium (CR-2032) batteries (included) Display Type LCD segment 7-digit main display, 3-digit count, 5-digit scale display, with annunciator legends Display Dimensions Upper 0.62 x 1.22" (15.8 x 31 mm)Lower 0.79 x 1.22" (20 x 31 mm) Accuracy Mechanical accuracy 99.8%. Users should allow for 2-4% variance for start/stop points and rolling surfaces.
Calculator, construction master pro
Item No. CAL4065
The Construction Master Pro is an award-winning advanced feet-inch-fraction construction-math calculator with powerful built-in solutions perfect for completing layouts, plans, bids and estimates. Calculate circles, roofs, stairs, and more. Works in and converts between feet-inches-fractions and decimals, including metric. Use it in the field or office to save time, reduce costs, prevent re-work and maximize profits. Construction Calculations Work in and convert between building dimensions, including Metric Built-in Right-Angle solutions Areas, Volumes, Square-ups Complete Stair Layouts Roof, Rafter and Framing solutions Circle Arcs, Circumference, Segments Drywall - Siding and Panels Stairs - Riser Height and solve for Stairwell Opening Studs On-center Compound Miter Cuts Arched Rake-Walls For Contractors, Estimators, Architects, Carpenters, Framers, Draftspersons, Engineers, Builders, Tradespersons
Calculator, construction master, pro trig
Item No. CAL4080
The Construction Master Pro Trig provides construction professionals with complete trig functions to help them quickly and easily solve complex construction-math problems. It saves time, reduces costs and prevents re-work. You can effortlessly work in and convert between feet-inch-fractions and metric units. Instantly calculate complex construction challenges for stair layouts, roofs, framing and much more. Full trig functions with sine, cosine, tangent, arcsine, arccosine and arctangent. Construction Calculations Work in and convert between any building dimension, including Metric Trig Function Find Weight per Volume Built-in Right-Angle solutions Complete Stair Layouts Roof, Rafter and Framing solutions Circular Arcs, Circumference, Segments and More Stairs - Set Riser Height and solve for Stairwell Opening Studs - Find number On-center for an entered Length Compound Miter Cuts Arched Rake-Walls Equal sided Polygons For Contractors, Architects, Engineers, Project Managers, Estimators, Draftspersons, Builders, Framers, Carpenters, Tradespersons
Scale Master Pro XE, pro, plan measure
Item No. CAL6135
Complete takeoffs with speed and accuracy Reduce errors in estimates and bids Improve productivity and maximize profitability Create permanent record of dimensions and values Interfaces with PC spreadsheets or estimating programs with optional PC interface cable Ergonomic design makes it more comfortable to hold, easier to use Dual LCD displays show more information Count while rolling push-button counter lets you count items as you roll Use the dimensional units best-suited units to fit your work - decimal feet, feet-inches, decimal yards-feet- inches, miles, nautical miles, acres, millimeters, meters, kilometers, and hectares - most available in square and cubic formats Ten custom scales five each for imperial and metric units, lets you roll or define any scale, even from plans that have been reduced, enlarged or are out of scale - permanently store the new scale for future use Dedicated length, width and height keys roll, store and recall LxWxH values and instantly find rectangular areas and volumes Auto count feature automatically counts how many times a pre-set distance has been rolled - great for stud counts, columns, fence posts, outlets, fixtures or any other regularly spaced items Includes Hard cover protective case User's Guide Two CR-2032 long-life lithium batteries One-year warranty Tech Specs Size 7.3 x 1.9 x 0.6" (186 x 47 x 15 mm) Product Weight (product only with battery) 2.1 oz. (60 g) Power Two 3-volt lithium (CR-2032) batteries (included) Display Type LCD segment 7 digit main display, 3 digit count, 5 digit scale display Display Dimensions Upper 0.62 x 1.22" (15.8 x 31 mm)Lower 0.79 x 1.22" (20 x 31 mm) Accuracy Mechanical accuracy 99.8%. Users should allow for 2-4% variance for start/stop points and rolling surfaces. Wheel Resolution 0.025" (0.635mm) PC Interface Requires optional 15' USB interface cable.