Kapro
David Whites SitePro LLC
Narrow Your Results
Main Category
Sub Category
- List View
- Gallery View
| Page of 2 |
Kapro Basic Cross Laser
Item No. KAP862G
The 862G is a basic cross-line laser level. It is ideal for tiling, cabinet installation, framing, trim carpentry, and picture hanging. Green cross-line laser with vertical, horizontal, and cross beams Indoor laser range 65 Ft. (20m) Accuracy 1/4 In. at 50 Ft. (0.4mm/m) Manual mode for angular layout/tilted marking Includes Soft carry case, 'velcro' strap, and 2 AA batteries
Kapro Pro Cross Laser w/stand
Item No. KAP870G
The 870G boasts an IP65 rating and is ideal for tiling, deck installation and exterior layout, door and window installation. Green cross-line laser with vertical and horizontal cross lines at 90° Water and dust proof (IP65) Protective rubber over molded casing Indoor laser range 100 Ft. (30m), Outdoor range (with detector) 200 Ft. (60m) Accuracy 1/8 in. at 50 Ft. (0.2mm/m) Includes Soft carry case, wall mount, laser target, tripod adaptor, and 3 AA batteries The 870G cross line laser features a green beam. Green beams are significantly brighter and easier for the human eye to detect than red lasers, especially in indoor conditions.
Kapro Pro 3 Beam Cross w/stand
Item No. KAP873G
The Kapro 873G laser features 2 intersecting vertical and 1 horizontal green laser beams. Green beams are significantly brighter and easier for the human eye to detect than red lasers, especially in indoor conditions. The 873G is ideal for aligning tiles, cabinets, borders, moldings and trims, and door and window installation. Green laser with 3 beams one horizontal, and two vertical beams (with a 90° intersection) Indoor laser range 100 Ft. (30m), Outdoor range (with detector) 200 Ft. (60m) Accuracy 1/8 In. at 50 Ft. (0.2mm/m) Strong folding legs for angle mounting and height adjustment Shock resistant rubber casing 3 AA batteries included
Kapro 4 Beam Laser plus Plumb Dot
Item No. KAP875G
The Kapro 875G automatically determines the horizontal and vertical planes. The laser simultaneously projects one horizontal and 4 orthogonal vertical beams, intersected forward and on the ceiling, plus plumb dot down. It is ideal for setting floor and wall tiles drywall, deck, and acoustic ceiling installation framing and aligning windows and doors.The 875G All Lines laser features a green beam. Green beams are significantly brighter and easier for the human eye to detect than red lasers, especially in indoor conditions. Green laser with 5 beams plus plumb dot One horizontal, Four vertical (with 90° intersection on ceiling) Indoor laser range 100 ft. (30m), Outdoor range (with detector) 165 ft. (50m) Accuracy 1/8 in. at 50 ft. (0.2mm/m) Manual mode for tilted marking Includes laser target, rechargeable lithium ion battery, and soft carry case
Kapro 3 Beam 360 Degree Laser
Item No. KAP883G
The 883G automatically determines the horizontal and vertical planes. The laser projects one horizontal 360° and 2 orthogonal 360° vertical beams, that intersect on 4 walls, floor and ceiling. It is ideal for accurately laying out right angles for flooring, drywall installation and deck construction leveling slopes (manual mode) framing and aligning windows and doors. Green laser with three 360° beams including horizontal, side vertical, forward vertical Indoor laser range 65 ft. (20m), Outdoor range (with detector) 230 ft. (70m) Accuracy 1/8 in. at 50 ft. (0.2mm/m) Manual mode for tilted marking Includes beamfinder glasses, laser target, lithium ion battery and battery charger, multifunctional magnetic mount, and hard carry case The Kapro 883G 3D laser features a green beam. Green beams are significantly brighter and easier for the human eye to detect than red lasers, especially in indoor conditions.
Kapro Self-leveling Green Beam Rotary Laser with 2 Plane Manual Slope
Item No. KAP8991G
KIT Includes Laser Unit Laser Detector BeamFinder Glasses Laser Target Remote Control Rechargeable NiMH Battery Pack w/Alkaline Battery Back Up Shockproof Hard Case FEATURES IP-65 protection from dust and moisture Horizontal or vertical 360° rotating beam Plumb Down/Plumb Up point Electronic self-leveling range ±5° Five variable speeds (0, 60,120, 300, 600 rpm) Six scan modes (0°, 10°,45°, 90°,180°, 360°) Laser range up to 300m (980 ft) with laser detector Accuracy ± 0.1mm/m (0.0001&Prime/&rdquo) Manual mode for marking slopes of up to ±5° in both X and Y planes Protective Rubber over molded casing 2 Tripod threads 5/8&Prime for vertical and horizontal use Field of Applications Laying inclined concrete surfaces Ensuring run-off pathways Laying water and sewage lines Laying concrete Wall, fence and deck construction
Anti-Crush Bipod, Carbon Fiber/Aluminum, Thumb Release
Item No. SIT07-4364-FY
&bull New anti-crush bipod head prevents cushing of carbon fiber range and prism poles when clamping on &bull Fits 1- to 1.25 inch (24.4 to 31.8 mm) outter pole diameter &bull Poles with 1.5 inch (3.81cm) outside diameter can attach easily through the top of the open clamp &bull Poles easily attach through the front facing open clamp system &bull Bipod extends to 6 feet (1.8m) and collapses to 42.6 inches
2 meter 3-position snap-lock carbon fiber GPS rover rod, Outer pole graduations – 10ths/100ths
Item No. SIT09-2222-GT
Lightweight 2-section telescoping carbon fiber pole Snap-loc for no slip with compression lock &ndash 3 heights 2m, 1.8m or 1.6m and collapses to 1.343m Outer pole graduations &ndash 10ths/100ths On-board 20-minute, adjustable circular vial
Tribrach bag, padded
Item No. SIT21-1200
Protects tribrach during transport and storage. Fits all SitePro 1200-Series Tribrach models Size 9&rdquo x 8.5&rdquo x 5.5&rdquo
Lath bag, heavy duty, 36"
Item No. SIT21-236
The SitePro 36-inch (92 cm) heavy duty lath bag is designed for purpose, durability, and with style. Constructed with high strength fiber material and tough, reinforced 8&rdquo (20 cm) diameter bucket style bottom. Features tough, waterproof and abrasion-resistant composite material at the bottom and 6&rdquo (15 cm) up the side. Designed to hold 36 inch lath, and heavy duty adjustable shoulder strap and hand loop to carry. Features three large pleated outside pockets for markers, paint, and other materials. FEATURES Hold and carry 36&rdquo (92cm) lath Constructed with high strength fiber material and tough, waterproof and abrasion-resistant material at bottom Three (3) large, pleated outside pockets Heavy duty stitching for greater durability Overall inside dimension is 8&rdquo x 33.5&rdquo(20 cm x 84 cm) Color Hi-vis orange
Lath bag, heavy duty, 48"
Item No. SIT21-248
The SitePro 48-inch (122 cm) heavy duty lath bag is designed for purpose, durability, and with style. Constructed with high strength fiber material and tough, reinforced 8&rdquo (20 cm) diameter bucket style bottom. Features tough, waterproof and abrasion-resistant composite material at the bottom and 6&rdquo (15 cm) up the side. Designed to hold 48-inch lath, and heavy duty adjustable shoulder strap and hand loop to carry. Features three large pleated outside pockets for markers, paint, and other materials. FEATURES Hold and carry 48&rdquo (122cm) lath Constructed with high strength fiber material and tough, waterproof and abrasion-resistant material at bottom Three (3) large, pleated outside pockets Heavy duty stitching for greater durability Overall inside dimension is 8&rdquo x 45&rdquo (20 cm x 114 cm) Color Hi-vis orange
Jumbo triple prism bag
Item No. SIT21-2542
The SitePro large padded case is constructed with high strength fiber material with extra thick padding to ensure any precision surveying product is protected during transport. FEATURES Thick padding on all inner sides Used for Triple Tilting Prism Inside dimensions 9 x 7 x 2-in (22.9 x 17.8 x 5.1 cm) Weighs 0.5 lb (0.34kg)
