Surveying Equipment
A/E Supplies
Narrow Your Results
Sub Category
Mfr / Trade Name
- List View
- Gallery View
| Page of 1 |
Kapro Basic Cross Laser
Item No. KAP862G
The 862G is a basic cross-line laser level. It is ideal for tiling, cabinet installation, framing, trim carpentry, and picture hanging. Green cross-line laser with vertical, horizontal, and cross beams Indoor laser range 65 Ft. (20m) Accuracy 1/4 In. at 50 Ft. (0.4mm/m) Manual mode for angular layout/tilted marking Includes Soft carry case, 'velcro' strap, and 2 AA batteries
Kapro Pro Cross Laser w/stand
Item No. KAP870G
The 870G boasts an IP65 rating and is ideal for tiling, deck installation and exterior layout, door and window installation. Green cross-line laser with vertical and horizontal cross lines at 90° Water and dust proof (IP65) Protective rubber over molded casing Indoor laser range 100 Ft. (30m), Outdoor range (with detector) 200 Ft. (60m) Accuracy 1/8 in. at 50 Ft. (0.2mm/m) Includes Soft carry case, wall mount, laser target, tripod adaptor, and 3 AA batteries The 870G cross line laser features a green beam. Green beams are significantly brighter and easier for the human eye to detect than red lasers, especially in indoor conditions.
Kapro Pro 3 Beam Cross w/stand
Item No. KAP873G
The Kapro 873G laser features 2 intersecting vertical and 1 horizontal green laser beams. Green beams are significantly brighter and easier for the human eye to detect than red lasers, especially in indoor conditions. The 873G is ideal for aligning tiles, cabinets, borders, moldings and trims, and door and window installation. Green laser with 3 beams one horizontal, and two vertical beams (with a 90° intersection) Indoor laser range 100 Ft. (30m), Outdoor range (with detector) 200 Ft. (60m) Accuracy 1/8 In. at 50 Ft. (0.2mm/m) Strong folding legs for angle mounting and height adjustment Shock resistant rubber casing 3 AA batteries included
Kapro 4 Beam Laser plus Plumb Dot
Item No. KAP875G
The Kapro 875G automatically determines the horizontal and vertical planes. The laser simultaneously projects one horizontal and 4 orthogonal vertical beams, intersected forward and on the ceiling, plus plumb dot down. It is ideal for setting floor and wall tiles drywall, deck, and acoustic ceiling installation framing and aligning windows and doors.The 875G All Lines laser features a green beam. Green beams are significantly brighter and easier for the human eye to detect than red lasers, especially in indoor conditions. Green laser with 5 beams plus plumb dot One horizontal, Four vertical (with 90° intersection on ceiling) Indoor laser range 100 ft. (30m), Outdoor range (with detector) 165 ft. (50m) Accuracy 1/8 in. at 50 ft. (0.2mm/m) Manual mode for tilted marking Includes laser target, rechargeable lithium ion battery, and soft carry case
Scale Master Pro, digital plan measure
Item No. CAL6025
Get instant linear, rectangular area and volume take-offs use it like a pen - just roll and measure Convert between scales and dimensions Six user-set custom scales. Calibrates to any plan and then stores that scale for future use. Perfect for scaling faxed or out-of-scale plans. Calculate rectangular areas/volumes (LxWxH). Roll and enter length of room, then width and instantly calculate square footage. 72 built-in scales 39 U.S. (feet-inch) and 33 metric. Multiple dimensional units for versatility select the measurement units you use decimal feet, feet-inches, decimal inches, yards, millimeters, meters, kilometers - including square and cubic formats Subtract and Counter feature lets you subtract if you roll too far. Also lets you count items (e.g., studs, outlets, etc.) and accumulate in memory. Easy-to-read dual display shows your measurement in feet/inches or metric Includes Hard cover protective case Complete User's Guide Two long-life CR2032 lithium batteries One-year warranty Tech Specs Size 7.3" x 1.9" x 0.6" (186 x 47 x 15 mm) Wheel Resolution 0.025" (0.635 mm) Wheel Composition Celcon Polymer Weight (product only with battery) 2.1 oz. (60 g) Power Two 3-volt lithium (CR-2032) batteries (included) Display Type LCD segment 7-digit main display, 3-digit count, 5-digit scale display, with annunciator legends Display Dimensions Upper 0.62 x 1.22" (15.8 x 31 mm)Lower 0.79 x 1.22" (20 x 31 mm) Accuracy Mechanical accuracy 99.8%. Users should allow for 2-4% variance for start/stop points and rolling surfaces.
Scale Master Pro XE, pro, plan measure
Item No. CAL6135
Complete takeoffs with speed and accuracy Reduce errors in estimates and bids Improve productivity and maximize profitability Create permanent record of dimensions and values Interfaces with PC spreadsheets or estimating programs with optional PC interface cable Ergonomic design makes it more comfortable to hold, easier to use Dual LCD displays show more information Count while rolling push-button counter lets you count items as you roll Use the dimensional units best-suited units to fit your work - decimal feet, feet-inches, decimal yards-feet- inches, miles, nautical miles, acres, millimeters, meters, kilometers, and hectares - most available in square and cubic formats Ten custom scales five each for imperial and metric units, lets you roll or define any scale, even from plans that have been reduced, enlarged or are out of scale - permanently store the new scale for future use Dedicated length, width and height keys roll, store and recall LxWxH values and instantly find rectangular areas and volumes Auto count feature automatically counts how many times a pre-set distance has been rolled - great for stud counts, columns, fence posts, outlets, fixtures or any other regularly spaced items Includes Hard cover protective case User's Guide Two CR-2032 long-life lithium batteries One-year warranty Tech Specs Size 7.3 x 1.9 x 0.6" (186 x 47 x 15 mm) Product Weight (product only with battery) 2.1 oz. (60 g) Power Two 3-volt lithium (CR-2032) batteries (included) Display Type LCD segment 7 digit main display, 3 digit count, 5 digit scale display Display Dimensions Upper 0.62 x 1.22" (15.8 x 31 mm)Lower 0.79 x 1.22" (20 x 31 mm) Accuracy Mechanical accuracy 99.8%. Users should allow for 2-4% variance for start/stop points and rolling surfaces. Wheel Resolution 0.025" (0.635mm) PC Interface Requires optional 15' USB interface cable.
